Acoustic Resilient layer for under screed isolation UK
Acoustic Resilient layer for under screed isolation UK
Acoustic Resilient layer for under screed isolation UK Acoustic Resilient layer for under screed isolation UK Acoustic Resilient layer for under screed isolation UK Acoustic Resilient layer for under screed isolation UK Acoustic Resilient layer for under screed isolation UK
Acoustic Resilient layer for under screed isolation UK
ACOUSTIBOARD-F
USES:
  • Separating Floors
  • Concrete Floors
  • Robust Detail FFT5 Compliant
    		•  BENEFITS:
  • Robust Detail Compliant FFT5
  • Provides significant reduction in impact noise and vibration
  • Easy to install
  • Does not significantly increase the floor level

    • ACOUSTIBOARD-F (Part Code A420)
    AcoustiBoard-F is designed to provide excellent acoustic sound insulation with ease of installation. No need for separate isolation layers and T&G chipboard. The product is a laminate of 5mm IsoScreed bonded to the bottom of 18mm P5 moisture resistant tongue and grooved chipboard.

    AcoustiBoard-F meets the Robust Details for Floating Floor Treatment 5, for constructions E-FC-1, E-FC-2 and E-FS-1.

    AcoustiBoard-F also complies with Part E Regulations as an overlay solution for a refurbished timber floor.

    Download PDF
    acoustic flooring
    Incorporating the latest changes to the Approved Document E 2003, the minimum and maximum sound insulation requirement for separating floors are as follows:
      

       Conversion

       New Build

    		 Airborne Sound Reduction DnTw+C;tr

    43dB or greater

    45dB or greater

    		 Impact Sound Level LnTw

    64dB or less

    62dB or less

    To comply with the requirements of the  Approved Document E 2003, AcoustiBoard-F sound insulated separating floors have been tested in accordance with BS EN ISO 140-6:1998 and rated in accordance with BS EN ISO 717-2:1997.


    Tested Performance of the Above Structure:-
      Airbourne              Impact
    Rw=59dB (Ctr-10)    Lnw59dB
    Rw + Ctr= 49dB


    Further improvements can be made by placing 19mm Gypsum based plank over the sub floor before installing the AcoustiBoard-F.
    If this is undertaken first then improved results will be:
      Airbourne              Impact
    Rw=62dB (Ctr-8)    Lnw54dB
    Rw + Ctr= 54dB


    SEPARATING FLOORS / CONCRETE FLOOR / ROBUST DETAIL FLOATING FLOOR TREATMENT 5 / Rd Delta LW18dB

    GENERAL PHYSICAL DATA
    Sheet Size-2400 x 600mm
    Thickness-23mm (above screed)
    Weight-13.165kg/m²
    Full System Fire Protection-60 minutes
    Sheet per pallet-52


    All information contained in these details is given in good faith but without warranty.
    Custom Audio Designs reserves the right to alter the specifications of any product without notice.

    ©Custom Audio Designs 2006