SOUND REDUCTION
Two performance versions are available:
Medium Performance
Sound Reduction Rw = 35dB
High performance
Sound Reduction Rw = 44dB
(Double leaf doorset has a 41dB rating)
Other acoustic performance / fire ratings may be available on request.
FIRE RATING
All 35dB doorsets are FD30 fire rated.
All 44dB and 41dB doorsets are FD30 rated.
FINISHES
Veneers: Maple, Oak, Sapele, Ash, Rotary cut Birch, Cherry, Clear lacquered Beech. Other veneers available on request.
Click here to view door finishes
Paints: Paint primer finish as well as a full range of NCS plus BS and RAL equivalents are available.
Laminates: Perstorp Creastyle range is recommended, but most other proprietary laminate ranges can be supplied at additional cost.
NOMINAL SIZES
Single Leaf Doorsets:
External overall doorframe size:
Doorleaf size:
Double leaf doorsets
External overall doorframe size:
Door leaf size:
|
2110 x 1012mm
2040 x 926mm
2110 x 1790mm
2040 x 850/850mm
|
Other sizes and thicknesses available to special order.
44dB and 41dB doorleafs are 64mm thick
35dB doorleafs are 54mm thick
Standard door frame 90 x 40mm hardwood section complete with a 30mm door stop and 90 x 20mm threshold. Deeper frame depths can be supplied upon special request.
|
Click here to view 35dB door/frame details
Click here to view 44dB door/frame details
NOMINAL WEIGHT
Single leaf 44dB doorset 85Kg.
Single leaf 35dB doorset 74Kg.
Double leaf 41dB doorset 144Kg.
Double leaf 35dB doorset 123Kg.
|
Download PDF |
|
DOOR HANDING
Please specify door handing, on disclaimer sheet, as shown below:

VISION PANELS
Vision panels, glazed in clear 17mm fire and acoustic safety glass, are available on the 35dB doors but not on the 41dB or 44dB doorsets.
The performance would be reduced to 38dB on a standard 44dB doorset. A window in a 35dB doorset will only reduce the performance by around 1dB.
ACOUSTIC SEALS
Perimeter seals are integrally fitted in the frames and an automatic lift threshold seal at the base of the door leaf. Other seals as required.
IRONMONGERY
Doorsets are supplied with hinges and seals prefitted. Handles and lockcases etc. are usually supplied and fitted
by others to suit the rest of the building.
INSTALLATION
Installed in a similar manner to standard timber doors. Installation guide is supplied with the doorsets.
Doorsets are supplied at a moisture content of 6-12% and should not be brought on site until conditions are
suitable. Wet trades should be completed and the building dried out. Do not build-in or install frames as first fixings.
Download Installation PDF
|
|