fibreglass absorption panels
fibreglass sound absorbers
home products products products products
fibreglass acoustic absorber

TYPE A: TEE JOINT ACOUSTIC PANEL SYSTEM
Acoustic Panel Systems

FIXING GUIDE
A. Screw fix Upvc female perimeter trim to top, bottom and end of walls.

B. Screw fix Upvc female 'T' joint, trim vertically between top and bottom Upvc female perimeter trims, allowing for the panels width and height.

  C. Cut and insert individual panels to fit between female perimeter and female 'T' joint trims. Push fit top and bottom male perimeter trims then neatly cut vertical male perimeter and vertical male 'T' joint trims to fit between the top and bottom perimeter trims and push fit togeather. Make sure to place the 'pullstrip' labelled end upwards. Insure that all trims are fully pushed in and located.
EASY FIX
INSTALLATION
- by using
Upvc clip-in trims		 For heights greater than
2.7m panel height, use 'T'
joint trim horizontally
INSTALLATION
Use a spirit level to align all horizontal and vertical surfaces. Drill oversized holes in the Upvc female trims larger than the screw shank but smaller than the screwhead. Use the 'V' line as a guide. Screw fix at maximum of 400mm centres.
NOMINAL DIMENSIONS
Panel Size: 2700mm x 1200mm (Part Code SS100)
Thickness: 25mm
White PU25 Upvc fixing trims: 2700mm lengths (Part Code SS110)
White PT25 Upvc fixing trims: 2700mm lengths (Part Code SS120)
5 Litre adhesive Tins: (Part Code SS230)
acoustic absorption panels

All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.
©Custom Audio Designs 2007