Acoustic Absorption Panel Systems

ACOUSTIC PANEL SYSTEMS

Click for Details		TYPE A: 'T' JOINT PANEL SYSTEM This is the most economical panel utilising white Upcv fixing sections. The panels have cut edges on all four sides. The Upvc sections serve two functions. One is to decoratively mask the edges and the other is as structural fixing sections. This system is the most flexible as panels can be cut onsite to suit wall dimensions. The fabric cover is adhered to the front face only and will remain in place even when the panels are cut, the raw edges are hidden by the fixing trims.
Click for details		TYPE B: BUTT JOINT PANEL SYSTEM This eliminates the requirement of a tee joint section as this panel has reinforced long edges and the fabric facing is wrapped around the two long edges of the panel. This results in a neat, crisp butt joint between the panels. The fabric cover is wrapped around the two long sides which also have reinforcing strips to protect the edges.
Click for details		TYPE C: SHADOW JOINT PANEL SYSTEM This panel has no visible fixing sections on any of the four sides of the panel. The panel has reinforced edges on all sides with the fabric bonded to the face and all four sides are wrapped to rear. This results in a beautiful individual panel which can be used in single units or joined togeather to other panels or with shadow gaps as a design feature. The fabric cover is wrapped around the two long sides, and the two short sides which all have reinforcing strips to protect the edges.

APPLICATION
These acoustic panels are used to reduce reverberation noise levels in buildings such as lecture theatres, music rooms, offices, boardrooms, sports and community halls, classrooms,cinemas,interview rooms and many other applications. They transform a stark, echoing area into a warm quiet congenial work place. These panels are fabric covered and therefor they decorate and solve acoustic problems in one operation. They are simple to install in three different configurations.

MANUFACTURE
These acoustic panels are made from resin bonded fibreglass specifically tooled and pressed for maximum sound absorption. The panels are fabric finished hence forming an acoustic panel which is decorative, durable and resistant to mild impacts.

FINISHES
A wide range of standard fabric colours are available. Upvc trims are available in white but can be sprayed with suitable paint on site to acheive any required colour.

FIRE SAFETY
The acoustic glass fibre core is rated as Class0 to BS476. Standard fabrics comply with Part7 (class1) to BS476. Class0 fire rated fabrics are available upon request. Upvc trims are fire rated as BS476 part7. Like normal Upvc, the trims have a maximum softening limit of 60°C.

WEIGHT
The panels weigh approximately 3Kg/m². The Upvc trims weigh approx. 1Kg/length.

CUTTING
The panels can be cut with a sharp knife. Upvc trims and the panel edge reinforcement strips can be cut easily with a fine toothed fret saw or strong tin snips.

FABRIC MAINTENANCE
Fabric coverings can be wiped clean with a damp cloth and vacuumed or brushed periodically.

ACOUSTIC ABSORPTION
Noise reduction Coefficient 0.92 (i.e. 92%)

All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.